"SX1257: 862MHz to 960 MHz SX1255: 400MHz to 510 MHz"
LoRa TX Power:
2000 Piece/Pieces per Day
Packaging & Delivery
plastic tray or blister
The SX1301 digital baseband chip is a massive digital signal processing engine specifically designed to offer breakthrough gateway capabilities in the ISM bands worldwide. It integrates the LoRa concentrator IP.
The LoRa concentrator is a multi-channel high performance transmitter/receiver designed to simultaneously receive several LoRa packets using random spreading factors on random channels. Its goal is to enable robust connection between a central wireless data concentrator and a massive amount of wireless end-points spread over a very wide range of distances. The SX1301 is targeted at smart metering fixed networks and Internet of Things applications.
LoRaGW V1.0 is a small LoRa Module based SX1301 + 2*SX125x (SX1255: 400 to 510 MHz SX1257: 862MHz to 960 MHz). it's easy for user develop they own LoRa Gatway system. Use 19 Pins LCC interface, easy connect to any controler board. You just need power it with 5.0V power supply and an MCU to driver it with SPI interface. It can support with up to 5000 nodes per km2 in moderately interfered environment. This module it's easy to have the industry standard PCI Express Mini Card like our LoRaGW-PCIE V1.0, it will more convenient for user to connected it to controler board.
•Up to -142 dBm sensitivity with SX125x Tx/Rx front-end •SX1257: 862MHz to 960 MHz European, North American and Japanese •SX1255: 400MHz to 510 MHz •19 Pins LCC interface •1xSPI Interface + 5x GPIO •1xReset Pin, 1xGPS_IN Pss input Pin, 1xLoRa Antenna Pin •-139.5 dBm with included ref design •70 dB CW interferer rejection at 1 MHz offset •Able to operate with negative SNR •CCR up to 9 dB •Emulates 49x LoRa demodulators and 1x (G)FSK demodulator •Dual digital Tx & Rx radio front-end interfaces •10 programmable parallel demodulation paths •Dynamic data-rate adaptation (ADR) •True antenna diversity or simultaneous dual-band operation •Size:35.0mm * 28.0mm * 2.2mm(without shield case) •Power Supply : 5.0V / 1A
Packing & Delivery
1.Do you provide customer LOGO?
Yes, we can provide customer LOGO on firmware and hardware.
2.Do you accept PCBA orders only?
Of course, as a OEM/ODM manufacturer, we can provide PCBA in a short time with good quality.
3.Do you provide firmware support?
Sure thing, unlike other companies which are buying solutions from design company, we have our own firmware development team to support you in 100%.