OoliteV1.0 is a highly integrated and cost effective IEEE 802.11n 1x1 2.4 GHz Systemon-a-Chip(SoC) for wireless local area network(WLAN) AP and router module. OoliteV1.0 includes a MIPS 24K processor and integrated serial Flash, DDR2, two-port IEEE 802.3 Ethernet Switch with MAC/PHY, one USB 2.0 interface , I2S/SPDIF-Out audio interface, SLIC VOIP/PCM interface, UART, and GPIOs that can be used for LED controls or other general purpose interface configurations. OoliteV1.0 is designed for smart home deice, wifi hard disk, WiFi router board, remote monitoring, remote video, Industrial control DIY and so on OoliteV1.0 power consumption is very low,usually no more than 0.4W, suitable for battery products, it has a 150M wireless transmission rate, up to 21 gpios. All can be defined for input or output.
Characteristics: ◆CPU: AR9331 400Mhz MIPS core ◆RAM: 64M DDR2 RAM ◆Flash: 16M SPI flash (4/8/32m option) ◆Wireless speed: 135Mbps ◆General GPIO: 21 (except TX, RX) ◆USB: Usb 2.0 master interface, support USB hub extension ◆Power supply voltage: 3.3V. ◆Port: 1WAN and 1LAN 10/100Mbps network interface ◆Antenna: the built-in PCB /IPX external antenna. ◆Debug: serial debugging interface has been out. ◆Board Power: 0.36W ◆Product size: 27.5 * 51.4MM +- 0.1mm ◆SPI interface pin out.
Radio Transmitter Characteristics:
Radio Rechiver Characteristics:
Module Operating Environment:
Working temperature: 0 ℃ to 40 ℃; Storage temperature: -40 ℃ to 70 ℃; Humidity: 10% to 90% RH no condensation; Storage humidity: 5% to 90% RH no condensation.